June 6, 2025

Technical parameter 1. Dimensions: 1340*650*1800mm(LxWxH)2. Power supply: AC220V, 50Hz Product description This training board adopts the original car’s central locking anti-theft system, it displays the structural composition of the car’s anti-theft device and central locking system, it can demonstrate the working process of door locks and anti-theft systems. Product Composition Central locking ECU 1SET Window […]

Technical parameter Dimensions: 1500x1000x1800mm（L x W x H）Power supply: AC220V/50Hz Product description The trainer uses Lexus 400 electronically controlled pneumatic suspension system. It displays the structure and working principle of the electronically controlled air suspension system, and can carry out the training of the fault set and troubleshooting. Product composition Door switch 1PCS Height sensors

Main features 1. Test terminals is installed on the test panel, the electrical signals can be measured.2. Fault setting module: manual switch type(optional intelligent type) Training courses 1. Function introduction of main components of auto starting system;2. Demonstration of the working process of the startup system;3. Disassembly and assembly of starting motor;4. Electrical signal measurement

(The engine module not included) Main features 1.Asynchronous motor with regenerative feedback unit work as the brake unit for generating the engine load;2. Can test engine module MATL-T012;3. Power transmission from test engine to brake unit by elastic coupling;4. Quietening vessel for intake air;5. Potentiometer for continuous adjustment of braking torque and speed;6.Torque, air temperature,

Main features 1.Engine mounted on a base plate2.Power transmission to brake unit via claw coupling3.Engine completely equipped with fuel hose and an exhaust gas temperature sensor4.Fuel hose with self-sealing quick-release coupling5.Air-cooled single cylinder diesel engine with direct injection6. For installation in MATL-T002 engine test stand Technical parameter 1.Dimension:550 x 630 x 750 mm2.Power output: max.

Main features 1.Engine mounted on a base plate2.Power transmission to brake unit via claw coupling3.Engine completely equipped with fuel hose and an exhaust gas temperature sensor4.Fuel hose with self-sealing quick-release coupling5.Air-cooled single cylinder engine6.For installation in the panel of MATL-T001 engine test stand, and connect with MATL-T004 brake unit for test. Technical parameter 1.Dimension:460 x

Main features 1.Test stand for holding prepared single cylinder engines (two-stroke and four-stroke) with a maximum power output of 3kW2. The engine modules can be tested on this stand is MATL-T007, MATL-T0103.The engine modules can be connected to brake unit by V-belt drive or elastic coupling4.Brake speed can be continuously adjusted5.Measurement and display of temperatures

Technical parameter Automotive air conditioning training bench With optional electric motor dashboard. Three-phase 380 V, power: 1.5 KW Dimensions: about 1000x1600x1800mmEquipped with a OBD diagnostic seat Networks of color-changing diodes represent the different air flows and their respective temperatures on a synoptic diagram of the air circuit in large format, very clear Installation, operation and