MAKE- GEOAXIS
MODEL NO – PA50
SPECIFICATION
IS : 3085 And US bureau of reclamation. Specification: The Permeability test is carried out as per the standard IS: 3085 three cell model for 150 mm cube. High Pressure Permeability Test can be conducted on concrete specimens using different cells. Each cell has to be made up of steel and provided with a top plate and funnel at the bottom having gasket seals held in position through bolts and nuts.
The concrete specimens have to be sealed in the cells to prevent any leakage along the side
walls. Provision has to be made to collect permeable water in glass bottles attached at the bottom. Each test cell should have its own control valves. Further, the controls values have to be mounted on a sturdy welded structural stand. All multi-units are to be provided with end pressure gauges. Beside this, each unit has to be provided with chamber pressure gauges of
21 kg/cm sq. and test pressure gauge of 0- 17.5kg/cm.sq. Pressures are applied using any available pressure line at the site for a compressor.