Technical parameter
1. Dimensions: Rolling stand 1100x700x1100mm;
Control &test bench: 1000x600x1800mm
2. Battery: DC12V/120AH
3. Fuel tank:10L
4. Coolant: Glycol
Product description
The trainer displays the basic principles and structures of diesel engine. It is used for engine disassembly and assembly, commissioning, operation and inspection.
Product composition
Engine assembly 1PCS
Dashboard 1PCS
Battery 1PCS
Test panel with circuit schematic 1PCS
Engine flip frame 1PCS
Fuel pressure gauge 1PCS
Vacuum pressure gauge 1PCS
Sensor signal meter 3PCS
Fault set module (Manual switch type) 1SET
Main features
1. The trainer includes engine assembly, flip frame, control and testing bench, etc. The engine can rotate 360 degrees during disassembly and assembly, maintaining stability at any angle, making disassembly and assembly work very easy.
2. The control and testing bench is equipped with battery, fuel tank, cooling water tank, instrument panel, starting system and other engine starting accessories.
3. After the engine assembly is completed, the students can run and start the engine, ie. start, idle, accelerate, and
decelerate.
4. The control and test bench is equipped with the original vehicle electrical control circuit, test terminals, dashboard, etc.
5. The flip frame is equipped with a large oil basin, which allows tools, spare parts, and oil to not contaminate the ground of the training room during engine disassembly and assembly.
6. Fault setting module: Manual switch type (Optional intelligent type)
Training courses
1. Function introduction of main components of diesel engine;
2. Engine Disassembly and Assembly Training
3. Demonstration of engine operation, startup, acceleration, etc.;
4. Sensor and actuator signal measurement;
5. Fault set and troubleshooting;
6. Basic engine maintenance;
Suitable car or engine models listed below:
| P.N. | Car model |
| MATL-1006A-001 | Isuzu 4JB1(Diesel) |
| MATL-1006A-002 | JMC CB10(Diesel) |
| MATL-1006A-003 | Great wall 2.8TC(Diesel) (High pressure common rail) |
| MATL-1006A-004 | Isuzu 2.8TC (Diesel) (High pressure common rail) |