axislabs

MAKE- GEOAXIS MODEL NO – VT15 SPECIFICATION The Vicat apparatus should contain Vicat Mould,Glass Base Plate,Initial Needle (in Plastic Case) Final Needle (in Plastic Case), Consistency Plunger (in Plastic Case), Mild Steel Base Plate Vicat Mould Split Type, with Clamping Ring

MAKE- GEOAXIS MODEL NO – CV10 SPECIFICATION Ref std: IS 9377, IS 2386 Crushing value apparatus will be used for measuring the resistance of an aggregate to crushing as per IS 2386 (part 4). The equipment should consists of the following parts:- Cylindrical cell, plunger, base plate, tamping rod of circular cross-section 16mm diameter and

MAKE- GEOAXIS  MODEL NO – DB10 SPECIFICATION Ref. slandered: 2386 Part 3 Ruggedly constructed from galvanised wire mesh 20 cm dia x20 cm high (approx.)

MAKE- GEOAXIS MODEL NO – BD7 SPECIFICATION Ref. slandered: IS 1199, IS 10079, BS :1881 The apparatus will be used to determine the unit weight of aggregates and voids in between aggregate. The Cylindrical metal measures with ISI Certification mark IS-2385 (Part 3) consists of one each of the following measures: 3 litres,15 litres, 30

MAKE- GEOAXIS MODEL NO – SM6 SPECIFICATION IS : 4031, IS 9459, ASTM- C490 The apparatus will be used for the determination of change in size of concrete or cement sample, brought about by a change in moisture content. Test can be performed on freshly made specimens or specimen taken from existing structure. The apparatus

MAKE- GEOAXIS MODEL NO – PA50 SPECIFICATION IS : 3085 And US bureau of reclamation. Specification: The Permeability test is carried out as per the standard IS: 3085 three cell model for      150           mm cube.        High   Pressure Permeability Test can be conducted on concrete specimens using different cells. Each cell has to be made up